CLW5043JGKJ5 Main technical parameters of the aerial working vehicle
class	project		unit	data
Dimensions parameters	★ cabinet minister		mm	5995
	★ total width		mm	2050
	★ overall height		mm	2900
mass parameter	Number of passengers (including drivers)		human being	2
	★ gross mass		kg	4495
Main performance parameters	★ Rated load of the working platform		kg	260
	★ Maximum working height		m	23．0
	★ Operating range at the maximum working height		m	3.0
	★ Maximum operating range		m	9.0
	★ Operation height in the maximum operation range		m	17.0
	★ leg span	broadwise	mm	4140
		direction	mm	4300
Driving parameters	★ front overhang		mm	1065
	★ rear overhang		mm	1440
	★ wheel base		mm	3360
	Maximum driving speed		Km/h	99
	approach angle		°	27
	departure angle		°	11

 

 

Part name	Brief description
batholith	Jiangling shunda JX1041TG25
engine	The maximum power of issuzu engine is 85KW, national five emissions
pilothouse	Single row seat, can ride 2 people
Turn to assist	power-assisted steering
thermoregulation	Heating and cooling air conditioning
Panel and walking plate	Stainless steel fence and anti-skid walking pad
Take force system	mechanized operation
foot platform	High-strength aluminum alloy size: 1,280 X710X1200
Arm frame form	★ Four-section pentagonal working arm, synchronous expansion
rotator	360 degrees of continuous rotation
landing leg	★ Front V after H, individually adjustable (control)
operate	★ Electronic control operation, also equipped with manual emergency operation
navar	The CAN bus control system, equipped with a wireless remote control, to realize the stepless speed control
The leveling system	The quiescent fluid is automatically leveled

 

Straight-arm aerial working car
 

1.The maximum working height is 23meters

2.The super-large operation platform carries 260 KG (up to 3 people), and the working platform can rotate 180°.

3.The steel structural parts of the vehicle are made of high strength materials, with light weight, high strength, high toughness and high reliability.

4.Imported electrohydraulic proportional valve set with advanced CAN bus control system, and equipped with wireless remote control, the operation is safer and more convenient.

5.Getting off the bus is equipped with a 5-inch LCD screen, real-time display and detection arm length, elevation angle, platform height, operation height, etc.;

6.The boom adopts the domestic leading 3-section full-chain telescopic structure, with the built-in broken chain protector, making the work safer and more stable.

7.Front V back H-type leg, good stability, and equipped with "soft leg" protection function, can be operated at the same time or alone, adapt to a variety of working conditions.

8.Main supporting hydraulic and electrical parts: imported load sensitive proportional valve, balance valve, CAN bus control system are produced by well-known manufacturers at home and abroad.

9.The chassis adopts JMC Shunda Country V chassis, equipped with air conditioning, and the steering wheel adopts hydraulic power.

10.The basket is made of high strength aluminum alloy, which is not easy to damage and has more weight.

11.Pentagonal working arm, synchronous telescopic, compact structure, high operation efficiency, large operation range. Built-in telescopic oil cylinder, double chain telescopic mechanism, easier to observe the fault point, convenient maintenance.

12.CAN bus control system, the line is neat and simple. The vehicle has two operations: wireless remote control operation, (optional) can also be operated in the hanging basket, safe and reliable, high working efficiency.

 

 

http://www.zgjbjt.com/